Microsoft visual studio 2013 the operation could not be completed free. Subscribe to RSS
Find centralized, trusted content and collaborate around the technologies you use most. Connect and share knowledge within a single location that is structured and easy to search. After installing Visual Studio and playing around with some of the new features, I noticed I’m unable to open a cshtml file in one of my MVC projects. If I try opening it in the default html editor, I’m receiving the following error. So it seems to be an issue with the default Html Editor.
I’ve followed various suggestions for how to combat this problem from previous versions of VS. If I delete all the solution’s “. Once Visual Studio creates a new “. I’ve tried doing a repair install on VS, however I’m still running into the same issues. Also, running VS in Safe-Mode did not work either. I tried creating a new MVC project, which failed during creation. With any of these errors, the windows event log does not contain any messages.
Just found your question here because it happened to me as well. Changing this the value to “3. I never had a problem with this on VS or VS It seems there is something in the IDE that is not handling this gracefully.
Like most people here have mentioned, review your web. I was in a rush, just copied and pasted appSettings from another solutions without noticing the section existed already in the existing document. Then issue this thread relates to started to surface. I went back and consolidated the appSettings , saved, and the issue ceased to exist. Quick and dirty fix is to right click the your project and choose “Use Visual Studio Development Server” and then again right click and choose back to “Use IIS Express” will fix this problem.
This way I will care about all the changes required in configuration file. I also got this problem after using some Nuget package. The problem was a duplicate of appSettings. I merged them all and it worked. There is also this thread that an MS employee has answered with possible cause:. This is a bug in the debugger. There is a race condition that happens when all of the following are true:. The other process stops hits breakpoint, step operation completes, stops at an exception, etc at a moment when IE is not running script code.
The most likely reason for this to happen is that the code from ‘setTimeout’ is run, but I am not a JScript expert, so I am sure there are other possible reasons as well. I had error in my web. I had the same error in VS running on Win Fortunately fixed simply with a reboot.
On restart it appears windows applied some updates in the previous session which broke VS somehow. NET 5 RC 1. Installing Visual Studio Update 1 fixed the problem for me. I was asked by a colleague to look at this problem. I tried all the proposed solutions and nothing worked.
Eventually I found that they had done a project Update from svn and they had a conflict and ignored it. In one of the config files I found the conflict marked “. I corrected this and all now loads without error. In my case, the problem was due to my web. Stack Overflow for Teams — Start collaborating and sharing organizational knowledge.
Create a free Team Why Teams? Learn more about Teams. Asked 8 years, 9 months ago. Modified 5 years, 1 month ago. Viewed 35k times. Has anyone else had this problem? Improve this question. Tom Stickel Brosto Brosto 4, 2 2 gold badges 32 32 silver badges 51 51 bronze badges. The answer to the suggested duplicate involved deleting the.
The error I was receiving ended up being related to Visual Studio not handling a web. Add a comment. Sorted by: Reset to default.
Highest score default Trending recent votes count more Date modified newest first Date created oldest first. Deleted all. Fixed the web. Hope it will also fix your situation. Improve this answer. I followed your steps, but I don’t get any error in my web. Unfortunately, I’m still receiving the error. Thanks, I’m pretty sure you only have to check your web. Mine had a merge conflict in it, resulting in this error. An error in the web.
Fixing the web. Worked for me. Thanks for sharing, you’re a life saver! From doing a previous search in the web. I didn’t realize it.. Show 1 more comment. That was helpful for me — NikitaKo.
Thanks — Fab I was going mad about this error. I wish windows was not so unpredictable while setting something on it. Then F5 and wait until it is finish. Stop it and change the browser back to Chrome. After that the error disappeared. I just figured it out. In my web. Vlad Vlad 57 1 1 silver badge 1 1 bronze badge. This is so annoying.. Happens to me once a week now. I got this same error but only after I installed ASP. Geovani Martinez Geovani Martinez 2, 2 2 gold badges 26 26 silver badges 31 31 bronze badges.
For me this error was resolved by setting the VS shortcut to “run as administrator”. ErikE ErikE 47k 22 22 gold badges silver badges bronze badges. I have this problem on my laptop, but not my desktop. Both machines have pretty much identical Visual Studio configurations.
The web. I have ReSharper installed, but disabling it didn’t solve the problem, so it’s probably not related. Running as admin worked for me, but I’d like to have a better fix. Any idea what specifically needs elevated privileges? My only guess: In Windows 7 and up, reading and writing to directories that are outside of the My Documents folder.
Check for errors in your web. Bjorn Vdkerckhove Bjorn Vdkerckhove 8 8 silver badges 21 21 bronze badges. Ahmad Ahmad 11 1 1 bronze badge. Patrick Desjardins Patrick Desjardins k 84 84 gold badges silver badges bronze badges.
The Operation Could Not Be Completed Invalid Pointer Visual Studio Updat
Find centralized, trusted content and collaborate around the technologies you use most. Connect and share knowledge within a single location that is structured and easy to search.
These errors started happening earlier today when I tried to check in some of my work to the team foundation server. I have tried using Visual Studio on the same computer, but I still get the same error. I’ve also googled for it but none of the solutions seems to help me. Normally you can delete the. You might have to set the StartUp Project for your solution afterwards.
Just to stay on the safe way, you can rename the. In my experience sometime VS crash on start because there is an error in some source code, and due to that error VS can’t compile the code, and then crash because without compiled code it’s unable to show form in design mode. In this case, deleting the. When deleting the.
Sometimes it is just a matter of closing Visual Studio and then open again. Applies to Update 2 and Update 3 as well as fresh base without any updates I ran into this same problem but deleting the. I finally managed to track it down to an IIS Express issue. I removed the site from my applicationhost. I edited this file to remove all of the site elements within the following element. You might want to be a little more selective and try to identify the site that is causing the conflict and remove just that.
Make sure your Output Window is visible before hitting the F5 button. If you have your Output Window maximized, occasionally Visual Studio does not re-open the Output Window when you restart it. I’m pretty sure deleting. I had same error. I couldn’t open any class and component of my solution.
I deleted the ComponentModelCache and tested any other solutions.. I had to remove a webproject. There was an old referencing DLL file inside, and I had to clean that webproject, and then it worked.
I removed an old project from the solution, after that the error occurred. I had to open the. After that it worked. To fix it I needed to stop the IIS site bound to the application and restart visual studio. Then start your site again. How I discovered the cause: Seems this is a pretty generic message for a wide range of issues, I ended up tracking down my particular issue to a few locked files by IIS with the event logs. The solutions for deleting all sites are kind of a “Nuke it from orbit” approach which should be used as a last resort.
Normally, when you remove a project from a solution, Visual Studio removes any references to it from other projects in the solution. In my case, however, I was sharing projects between solutions hence a bad project reference managed to sneak in, and deleting the bad references fixed the error.
Restart the visual studio as Admin will work on in many cases. The error can also happen if you’re in the folder in Windows Explorer or another app as you try to delete it from VS or have the file opened in another app. Windows has the habit of locking folders and files, especially on networked machines. It is possible to break the lock by using Process Explorer occasionally, but the simplest thing to do is to get out of the folder or close the file in question.
If you are using Visual studio and working on ASP. NET, create a new website, copy the previous files into the new site and build your site. Your old project is still referencing some old startup parameters. While working on VB. Net projects in Visual Studio , I have faced this issue many times. Usually, disabling the ‘Enable the Visual Studio hosting process’ option in the application’s debug properties solves the issue for me.
Usually, when the hosting process is enabled, calls to certain APIs can be affected. Worked for me after I closed Visual Studio Community Edition , opened it and opened project again. Had Happened to me because I was using this project as a dependency in another project and it was opened in another instance but the changes were not imitated.
For this problem, I resolved it by deleting the. This File can be found in the same place where your. Also, after deleting this file from the project make sure to reload your solution in order for it to take effect. Go to Run and type “inetmgr”, i. NET Framework version”. Change it. I got a clue from the event log. I was upgrading to. I would get this message when I tried to reload the solution when it wouldn’t load on startup. My solution was right clicking the solution and selecting “install missing features” which prompted me to download what I needed.
The download on the popup didn’t work so I just installed the. NET targeting pack for what I was on 4. I deleted all. But it didn’t worked for me. The following steps worked for me. In my case, someone had performed a manual branch merge and didn’t merge the filters file correctly. Visual Studio still loaded and built the file without any warnings, but would give the ‘unspecified error’ warning whenever trying to add or remove files from the project.
Scan your vcsproj. Close and reopen the project. In my case, ‘Silverlight 5 SDK’ was missing and so my silverlight projects are not getting loaded. Once i installed, problem is solved. Unfortunately, further configuration through the VS UI was not possible since the project won’t load.
Since the file configuration changes are persisted in the myProject. At that point the project would load and the user file was then regenerated when the project was next run in debug mode. Your ports may be different. Stack Overflow for Teams — Start collaborating and sharing organizational knowledge. Create a free Team Why Teams? Learn more about Teams.
Visual Studio popup: “the operation could not be completed” Ask Question. Asked 10 years, 6 months ago. Modified 8 months ago.
Viewed k times. I have installed the latest updates from Windows Update as well. Any ideas? Improve this question. Peter Mortensen If you’re hitting this, check the answers here as well: stackoverflow. Embarrassing — user Unload and reload project works for me. Add a comment. Sorted by: Reset to default. Highest score default Trending recent votes count more Date modified newest first Date created oldest first. Explanation The.
If you have custom controls: check the code in the constructor. The VS IDE will call the constructor of your custom controls even at design time, and weird things can happen at design time some properties dont works, your connection string probably isn’t populated As a last resort Improve this answer.
Max Max 7, 2 2 gold badges 28 28 silver badges 32 32 bronze badges. Sometime they can crash the IDE — Max. I delete the. In Visual Studio , the solution was to delete the.
Microsoft visual studio 2013 the operation could not be completed free.Subscribe to RSS
It’s only been years. The Overflow Blog. The operation could not be completed. I have restarted, tried to repair перейти на страницу VS Express install with no luck. Sign up using Facebook. Should we burninate the [master] tag? Highest score default Trending recent votes count more Date modified newest first Date created oldest first.